Skip to content

Country

2017-2023 Can-Am Maverick X3 Turbo / Max X3 Turbo GGB Trail Muffler and Bypass Pipe

Original price $989.98 - Original price $1,002.93
Original price
$1,002.93
$989.98 - $1,002.93
Current price $1,002.93

Fits:  

  • 2017 Maverick X3/Max
  • 2018 Maverick X3 Turbo R XMR/Turbo STD/XDS DPS/XRS DPS/XMR/XRC/R XRC/XRS DPS with Smart Loc
  • 2019-2020 Maverick Turbo/Max Turbo/Turbo R/Max Turbo R
  • 2020 Maverick Turbo RR STD/Max Turbo RR STD
  • 2020-2021 Maverick Turbo XRC/RR XRC/RR XDS XRS/Max Turbo RR XRS
  • 2020-2022 Maverick Max Turbo RR XDS 
  • 2021-2022 Maverick Max Turbo RR XRS CE
  • 2021 Maverick Turbo R DS CE/DS RS/Max Turbo R DS RS
  • 2021-2023 Maverick Turbo DS/RR XRC CE/RR XRS CE/Max Turbo DS
  • 2022-2023 Maverick Turbo RR DS CE/Max Turbo RR DS/RS
  • 2022 Maverick Turbo RR RS
  • 2023 Maverick Turbo RR/DS/RS/XDS/XRS Smart Shock/Max Turbo RR XDS/RR XRS Smart Shock/RR XRS STD

Weight:
Stock Muffler: 33.65 lbs

GGB Trail & Bypass Pipe: 20.35 lbs
Weight Savings: 13.30 lbs

TRAIL MUFFLER - INCREDIBLE SOUND, STOCK LIKE dB LEVELS

  • Built entirely from 304 Stainless Steel
  • ZERO Packing material
  • ZERO Maintenance
  • Increased HP and Torque
  • Designed to be run with stock programmer
  • Deep tuned exhaust note throughout the entire RPM range
  • Sound will not change over time
  • Direct Bolt-On
  • Reduced operating temperatures
  • Deep water compatible
  • All factory body panels re-install
  • Easily meets all sound level requirements

The GGB Trail muffler is constructed from 304 stainless steel and is a direct bolt on muffler that gives a deep tuned exhaust note, close to stock dB levels in the mid and high RPM’s and does not require a fuel programmer. The Trail Muffler provides an increase in exhaust flow resulting in 1-3 HP gain with increased torque. Each system is a direct bolt-on fit and allows all factory body panels to be re-installed. Submersion in mud and water will not affect the integrity or the performance of the GGB Trail muffler as its fully welded stainless steel design with ZERO packing is built to withstand the punishment. The GGB Trail muffler is a direct bolt-on, zero maintenance exhaust system that can be run with or without a programmer. The Trail Series will easily meet J1287 sound regulation of 96dBA.

This muffler has been SPECIFICALLY designed for this machine, tested and tuned accordingly to provide optimal exhaust flow and back pressure to allow the engine to efficiently achieve peak power with the stock programmer. There is NO DRONE with our Trail Muffler. The Trail Muffler has an incredible tuned sound to it. Slightly louder than stock at idle for that head turning start up. As the RPMs increase the Trail Muffler reduces sound, keeping measured dB levels close to stock through the middle and upper RPM range while providing a deep tuned exhaust note from idle to wide open throttle. Our design allows for reduced operating temperatures and weight savings compared to stock.

In hand you will notice the build quality and fit and finish of the product we deliver, and installation is straight forward as each system is a direct bolt-on using factory mounts and all necessary hardware is included.

Spring Puller: Yes